Understand the ways to expand the lifespan of the hot water system.
Hot water systems are the extremely essential household appliance that offers comfort and warmth. A hot water system in Willetton is one of the most necessary appliances. People across Australia require a hot water system almost every day. However, longevity can have a significant impact on improper care and neglect. Extending the lifespan of the hot water system will not only save you a huge amount of money in the long run, but it is also essential if you want to enjoy uninterrupted services.
How to expand the lifespan of the hot water system?
- Understand the type of hot water system in Willetton you have
Before you create a maintenance strategy, it is important for you to understand the type of hot water system in Willetton you have in your home. There is quite a huge variety of systems available, which includes the following.
- Storage tank system with storage hot water in a tank and available on demand.
- Continuous hot water systems or tankless systems provide hot water when needed.
- Solar hot water systems make use of solar panels to heat water
- Heat pump systems generally extract heat from the air to provide hot water.
Every type of hot water system in Willetton has specific maintenance requirements. So it is always better that you consult professional hot water installation in Willetton to get better recommendations for your system.
- Schedule a frequent professional inspection
One of the best ways to expand the lifespan of your hot water system is to look for a professional inspection. You need to schedule regular inspections from qualified plumbers. Professional inspection is always a better choice as they make use of high-end equipment that can easily identify minor issues before they take a turn and become a significant issue. During the checkup, the Plumber will inspect the pressure relief valve, and thermo thermostat settings, look for the signs of leakages or corrosion and make sure that the connections are secure.
You always have to make sure that the hot water system is getting annual checkups as it will help to catch potential problems before they become a major issue and reduce the efficiency of the system.
- Flash the system regularly
Mineral and sediment buildup inside the tank can also reduce the efficiency of your hot water system in Brentwood. It can also lead to premature failure. Such buildup can cause the system to overheat, damaging internal components, and consuming more energy. If you frequently flush the system, it can help to prevent such a situation.
Following are the steps that you can follow to flush your hot water system.
- Turn off the power or gas supply to the system.
- Close the cold water supply valve.
- Attach a hose to the drain valve at the bottom of the tank.
- Open the drain valve and let the water (along with the sediment) drain out.
- Once drained, close the valve, remove the hose, and reopen the water supply.
The ideal timeline for flashing the hot water system is somewhere between 6 to 12 months in order to maintain the unit in optimal condition.
- Monitor the temperature settings.
You must also know that the water temperature setting also plays a pivotal role in the hot water system in Lynwood. When you set the water temperature too high, it can result in putting extra strain on the system which can reduce the overall lifespan. It will also lead to increased energy bills and pose a huge risk to the household members. The ideal temperature for most hot water systems is somewhere between 49 to 60°C.
It is always better to regularly keep an eye on the thermostat to make sure that the temperature remains within the mentioned range. If you notice any sort of fluctuation, it can be a sign of malfunctioning. This is when you immediately have to get in touch with professionals who can work with your hot water system in Willetton.
- Keep a check on the anode rod.
The anode rod is one of the most important components in the gas hot water system in Willetton. It prevents corrosion inside the water tank. It generally attracts corrosive elements in the water and protects the tank lining from deterioration and rust. However, over time, the anode rod starts corroding itself and needs proper replacement.
- You can check the anode rod by the following steps.
- Turn off the power or gas to the water heater.
- Locate the anode rod, which is typically on top of the tank.
- Use a wrench to remove it and inspect its condition.
If the rod is heavily corroded (less than 0.5 inches thick), it’s time for a replacement. Anode rods usually need to be replaced every 3-5 years, but the frequency may vary depending on the water quality and the system’s usage.
- Inspect and repair leakages immediately
Even a small leakage can become a significant issue in reducing the lifespan of your hot water system in Mount Pleasant. Water damage can result in causing electrical issues, rust and structural damage to your home. All you need is to regularly inspect the hot water system in order to find the signs of leakage. If you find water pouring out from the base of the tank, dripping from the valve or connection or unusual corrosion and moisture on pipes, it can be an indication of leakage.
In such a situation, you need to immediately contact a professional. Quick action can prevent further damage and prolong the operational life of the system.
- Replace the components when required
Instead of waiting for the entire system to fail, proactively replacing certain components can extend the life of your hot water system. Common parts that may need replacement over time include:
- Thermostats: If your system struggles to maintain the correct temperature, replacing the thermostat might be necessary.
- Heating elements: In electric systems, the heating elements can burn out and need replacement to keep the system functioning.
- Pressure relief valves: These valves are essential for preventing excess pressure in the tank. If they fail, they can cause leaks or even explosions.
- By staying on top of part replacements, you can avoid the need for a complete system replacement and enjoy reliable hot water for longer.
Choose Austwest Plumbing & Gas
So, these are some of the basic ways of expanding the lifespan of your hot water system in Willetton. However, as there is always a need for professional interference, you need to make sure that you’re choosing an expert in the field. Austwest Plumbing & Gas can be an ideal choice for hot water installation in Willetton. With some of the best experts on the team, we have always offered great solutions to people. You can directly get in touch with us today to learn more and book a professional to work with your plumbing system.
